From:www.jweicut.com View:1273 times

In order to improve the service life of the clothing proofing machine, it is generally required to avoid direct sunlight and other heat radiation, and to avoid places that are too humid, dusty or corrosive. Corrosive gas is easy to corrode and deteriorate electronic components, resulting in poor contact or short circuit between components, affecting the normal operation of the equipment.

The operating procedure is one of the important measures to ensure the safe operation of the clothing proofing machine. The operator must operate according to the operating procedure. When the machine tool fails, the operator should pay attention to keep the scene and explain the situation before and after the failure to the maintenance personnel to facilitate analysis and diagnosis of the cause of the failure and eliminate it in time.

1. Prevent electric shock

1. When the clothing proofing machine is powered on or running, please do not touch any electrical components in the electrical cabinet and the operating table. Otherwise, electric shock may occur.

2. Please do not operate the switch knob of any clothing proofer with wet hands to prevent electric shock.

3. Please do not check the line or replace the electrical components with electricity, otherwise it will cause electric shock or injury.

4. Maintenance personnel with corresponding technical qualifications should only follow the electrical maintenance technical requirements to repair the clothing proofing machine. To prevent accidents.

2. Prevent Fire

1. The working materials used in the garment proofing machine are flammable gases such as acetylene, propane, liquefied gas and other gases. Therefore, it is necessary to regularly check whether the entire gas circuit is well sealed.

2. The gas source part of the clothing proofer should be away from open flames, and normal carbon dioxide or other corresponding fire extinguishing devices should be placed near it.

3. When the operator adjusts the fire of the garment proofing machine, it should be controlled in time to avoid fire.

Tags： clothing proofing machine